NEC NEAX 2400IPX Dterm i Series User Manual

NEC NEAX 2400IPX Dterm i Series User Manual Manual pdf 51 page image

70FACE LAYOUT1 CALL INDICATOR LAMPLamp at top corner of Dterm Display flashes when acall terminates to the terminal. Lamp lights steadilywhen a message has been left.2 LCD(NOTE 1)Liquid Crystal Diode (LCD) display provides Dtermactivity information plus date, time and Soft KeyOperation. The LCD display has 24-character, 3-linecapability.3 EXITThe user can escape from the Help key mode bypressing this key.4 SOFT KEYSAny feature shown at the bottom of the LCD display isavailable. The appropriate feature key is displayed onthe screen according to the call handling process.5 HELPExplanations of the Soft Keys can be called up on theLCD display by pressing this key.6 PROGRAMMABLE KEYS[Programmable by telephone system administrator(Flexible Line/Feature Keys)]• Station line access• Trunk line access• Feature access[Programmable by user (Flexible Line/One-TouchSpeed Dial)]• Station line access• Trunk line access• Feature access

(Note 2)

• Any feature can be assigned.• Direct station selection• Station speed dial7 RECALLPress key to terminate established call and return to theinternal dial tone.8 FEATUREUsed to activate terminal setup functions and toprogram One-Touch Speed Dial/Feature Keys.9 DIRECTORY (NOTE 3)Press key to activate speed calling – system feature.10 M ESSAGE (NOTE 3)Press key to access the voice mail system.11 M ICPress key to respond hands free. LED on this key lightsduring speakerphone operation.12 C ONFPress key to establish a three-way conversation. LEDon key lights when key is active.13 LNR/SPD (LAST NUMBER CALL /S PEED CALLING)Press key to activate redial feature. Press redial andscroll back through numbers that have been dialed untilthe desired number is displayed. Press the ❉ or # (Note4) key to activate dialing.