NEC NLT-40FHD100 Owner's Manual

NEC NLT-40FHD100 Owner's Manual Manual pdf 56 page image

56Displayable Monitor SpecificationNote:a. If the set is cold, there may be a small “flicker”when the set is switched on. This is normal,there is nothing wrong with the set.b. If possible, use the VESA 1,024x768@60Hzvideo mode to obtain the best image quality foryour LCD monitor. If used to PC vertical fre-quency 85Hz, some noise can be seen whenPIP is on. In this case, set the PC vertical fre-quency to 60Hz. The set has been pre-adjustedto the mode VESA 1,024x768@60Hz.c. Some dot defects may appear on the screen,like Red, Green or Blue spots. However, this willhave no impact or effect on the monitor perfor-mance.d. Do not press the LCD screen with your finger fora long time as this may produce some tempo-rary distortion effects on the screen.e. When the PC screen appears on the set, a mes-sage may appear on the screen, and the mes-sage will differ according to the Window systemversion (Win98, 2000). If a message appearsclick “Next” until the message finishes.f. If the message “Out Of Range” appears on thescreen, adjust the PC as in the ‘DisplayableMonitor Specification’ section.g. Supportable resolution may vary as per graphiccard.RGB Mode / HDMI Mode(Synchronization input form : separate)Resolution640X350720X400640X480800X6001024X7681280X10241280X7681360X7681366X7681680X10501920X1080MODEDOSVGASVGAXGASXGAWXGAWSXGAHD 108070.070.085.060.072.075.085.056.060.072.075.085.060.070.075.085.060.060.075.060.060.060.060.0VerticalFrequency (Hz)DTV480p / 60576p / 50720p / 50720p / 601080i / 501080i / 601080p / 241080p / 501080p / 60