NEC NP-L50W User Manual
Also see for L50W: Quick setup guideUser manualSpecifications
                                                              | |
Contents
| 
41 ... EnglishAppendicesProblem: No image appears on screen Ensure all the cables and power connections are correctly andsecurely connected as described in the “Installation” section. Ensure the pins of connectors are not crooked or broken. Make sure the projector is switched on.Problem: Partial, scrolling or incorrectly displayed image Press “AUTO ADJ.” on the remote control. If you are using a PC:For Windows 95, 98, 2000, XP, Windows 7:1. From the “My Computer” icon, open the “Control Panel” folder,and double click the “Display” icon.2. Select the “Settings” tab3. Click on the “Advanced Properties”.For Windows Vista:1. From the “My Computer” icon, open the “Control Panel” folder,and double click the “Appearance and Personalization”2. Select “Personalization”3. Click “Adjust screen resolution” to display “Display Settings”.Click on the “Advanced Settings”.If the projector is still not projecting the whole image, you willalso need to change the monitor display you are using. Refer tothe following steps.4. Verify the resolution setting is less than or equal to 1280 x 1024resolution.5. Select the “Change” under the “Monitor” tab .TroubleshootingIf you experience trouble with the projector, refer to the fol-lowing information. If the problem persists, please contactyour local dealer or service center. |
Related manuals for NEC L50W
manualsdatabase
Your AI-powered manual search engine