NEC NP-PA500U Installation Manual

Also see for NP-PA500U: Supplementary guide Installation and assembly User manual Specification

Contents

NEC NP-PA500U Installation Manual Manual pdf 1 page image

NEC Display Solutions of America, Inc.PA500U/PA500X/PA550W/PA600X Installation GuideDesktop and Ceiling Mount Rev 1.0www.necdisplay.com PA500U/PA500X/PA550W/PA600X Page 1 of 9ContentsProduct Description, Lens Specs, Screen/Aspect RatioNotes and Formulas Pg 1Distance Charts and Formulas Pg 1Ceiling Mount/Desktop Installation Pg 4Lens Shift Adjustable Range Pg 5Cabinet Dimensions Pg 6Cabinet Dimensions Pg 7Ceiling Mount Dimensions and Input Panel Pg 8Control Codes Pg 9Product DescriptionType: s3 panel LCD projector, Dimensions: 19.7”(W) x 6.5”(H) x 14.4”(D)0.79 p-Si TFT w/MLA (PA500X/PA600X)0.75 p-Si TFT w/MLA (PA550W)0.76 p-Si TFT w/MLA (PA500U) Weight: 17.0 lbsResolution: 1024 x 768 (4:3)1024 x 576 (16:9) Brightness: PA500X – 5000 Lumens1920 x 1200 (16:10) PA500U – 5000 LumensFan Noise: PA500X 38 dB / 31dB @ 1 meter PA550W – 5500 LumensPA500U 38 dB / 32dB @ 1 meter PA600X – 6000 LumensPA550W 38 dB / 31dB @ 1 meterPA600X 38 dB / 31dB @ 1 meterPower Consumption: PA500X/PA550W 464W (max) BTU’s: 1583 BTU/hourPA600X 464W (max) 1583 BTU/hourPA500U 477W (max) 1628 BTU/hourNetwork Ready, integrated wired and wireless adapter Manual: Lens Shift, Horizontal & Vertical /Zoom/ FocusLens SpecificationsNP11FL: Throw Ratio: ~ 0.8:1 Focal Length: 13.2mm NP14ZL: Throw Ratio: 2.97 -4.79:1 Focal Length: 48.5 - 77.6mmScreen Sizes: 60”-150” F/#:2.3 Screen Sizes: 60” - 200” F/#:2.2NP12ZL: Throw Ratio: 1.19 - 1.56:1 Focal Length: 19.4 – 25.3mm NP15ZL: Throw Ratio: 4.70 - 7.02:1 Focal Length: 76.6 - 116.5mmScreen Sizes: 40” - 200” F/#:2.2 _________ Screen Sizes: 80” - 200” F/#:2.2NP13ZL: Throw Ratio: 1.50 - 3.02:1 Focal Length: 24.4 – 48.6mmScreen Sizes: 40” - 200” F/#:1.7Screen/Aspect Ratio4:3, 16:9 and 16:10 screens are fully supported with proper aspect ratio control for both type sources using NEC developedscaling technology. Menu selections have settings for each screen type and aspect ratio control for each source type.Notes For screen sizes not indicated on the projection tables, use the formulas below.If the figures on the tables do not match the results of formulas, use the figures in the table.. Distances are in inches, for millimeters multiply by 25.4. Distances may vary 5%.Formulas: 4:3 Aspect Ratio (PA500X/PA600X—XGA)The Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image sizevaries. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below tocalculate all screen dimensions. Plug in the image width for “W” in the Projection Formulas.Refer to the diagrams and charts for popular screen sizes on page 2 and 3:Projection Formulas: Definitions: 4:3 Screen Formulas:NP11FL: C = 0.827W – 1.374 W = Image Width W = H x 4/3NP12ZL: C(Wide) = 1.214W – 1.794 ------ C(Tele) = 1.578W – 1.794 H = Image Height (size) H = W x 3/4NP13ZL: C(Wide) = 1.524W – 1.974 ------ C(Tele) = 3.043W – 1.972 C = Throw distance Diagonal = W x 5/4NP14ZL: C(Wide) = 3.034W – 4.844 ------ C(Tele) = 4.855W – 4.844NP15ZL: C(Wide) = 4.797W – 7.630 ------ C(Tele) = 7.291W – 7.630Note: Tilting the front of the projector up or down by more than 45° from level could reduce lamp life by up to 20%.