NEC NP-PH1201QL User Manual
                                     | |
Contents
| 
Page 20Important I n f o r m ationSelecting a power cableThe power cable is not included with the projector. Refer to the AC power work specificationssection below and provide the necessary power cable.Carefully read the contents described in this section before connection and connect the cablesaccording to the proper procedure. Inappropriate handling may cause fatal, serious or other bodilyinjuries due to fire or electric shock.Before connecting the power cables, check that the main power switch of the projector is turned off.Implement the connection with AC power shut off.Be sure to ground the equipment to ensure safety. Use a power cable that meets the standardsand power supply voltage of the country where you are using the projector (see AC power workspecification below), and always connect the equipment to the ground. If the ground is notconnected, it may cause electrical shocks.When connecting the power cable plugs to the AC IN and the electrical outlet, securely insert theplugs all the way in. If the connection between the power cable plug and the electrical outlet isloose, the plug area may generate heat, causing burns and accidents.AC power work specificationsAC power supply equipmentDo not use any voltage other than those shown below for the AC power supply connected to theprojector:• 200–240V AC, single phase, power, 50/60HzAC power supply cable for the projectorThe projector is equipped with an IEC60320 C20 inlet to connect an AC power supply cable. Usean IEC60320 C19 compliant AC power cable connector and ensure that the connector meets thefollowing current capacity specifications.Power supply voltage Projector input current Power cable current capacityAC 200-240 V 8.2 A 250 V 15 A or higherFurthermore, use cables, plugs and connectors that are suitable for the regulations of the country ofinstallation, as shown in the following table.Users in North America:Use a power cable no longer than 4.5 m / 14.76 ft according to National Electrical Code.1 Cable2 Plug3 Connector231 |
Related manuals for NEC NP-PH1201QL
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine