263. Projecting an Image (Basic Operation) Selecting a SourceSelecting the computer or video sourceDetecting the Signal AutomaticallyPress and hold the SOURCE button for a minimum of 1 second, the projector willsearch for the next available input source. Each time you press and hold theSOURCE button for a minimum of 1 second, the input source will change asfollows:Computer1 → Computer2 → Computer3 → Component → Video → S-Video →Viewer → Computer1 → ...If no input signal is present, the input will be skipped. When the input source youwish to project is displayed, release the button.Using the Remote ControlPress any one of the COMPUTER 1/2/3, COMPONENT, VIDEO, S-VIDEO,VIEWER or LAN buttons.OFF ONSELECTPOWERPOWERMENUENTEREXITVIDEOS-VIDEOVIEWERLANCOMPUTERCOMPONENT31 2Selecting from Source ListPress and quickly release the SOURCE button on the projector cabinet to displaythe Source list. Each time the SOURCE button is pressed, the input source willchange as follows: “Computer 1/2/3”, “Component”, “Video” (VCR or laser discplayer), “S-Video”, “Viewer” (slides on a PC card) or “LAN” (LAN port [RJ-45] orwireless LAN card).To display the selected source, press the ENTER button.AUTO ADJUST ON/STAND BYSOURCE3D REFORMSELECTAUTO ADJUST ON/STAND BYSOURCE3D REFORMSELECT
