3Continued on next pageIntroductionThank you for purchasing the LCD Projector NP350/NP50/NP150/NP350W.This guide explains how to set the enhanced wireless LAN security (authenticationmethod) on the projector as shown on the table below.Set the projector according to the security environment of your network.AuthenticationmethodEncryptiontype EAP type Digital certifi-cateFormat ofcertificateWireless LANWPA-PSK,WPA-PSK(→ Page 5)TKIPAES – Not used –WPA-EAP,WPA-EAP(→ Page 9)TKIPAESEAP-TLS Client certificate PKCS#1CA Certificate DERPEAP-MSCHAPv CA Certificate DERImportant:• Please note that instructions and explanation on security functions on the above table isnot included in the supplied “User’s Manual” or within the “Wired and Wireless NetworkSetup Guide”.• When you set WPA-EAP or WPA-EAP, be sure to set [DATE, TIME PRESET] beforeinstalling digital certificates. (→ page 8)If setting of [DATE, TIME PRESET] is not correct, a message “authentication error” will bedisplayed.• To install digital certificates on the projector, use a USB memory device in the market.