194-2. Wireless LANWhen connecting the wireless LAN, configure the LAN settings in the “WIRELESS” page of“NETWORK SETTINGS” selected from On-Screen Menu.■ Flow of SettingSetting of "CONNECTION".Select SSID in "SITE SURVEY".Input "SSID" (if necessary).Select "NETWORK TYPE" (if necessary).Select "CHANNEL" (if necessary).Setting of "SECURITY"Select "SECURITY TYPE".Select "KEY SELECT".Set "KEY 1 to KEY 4".If "EASY CONNECTION" is selected889101112131415161613Step Display "WIRELESS" page of "NETWORK SETTINGS".4Step Input "IP ADDRESS".2Step Select "PROFILES".5Step Input "SUBNET MASK".6Step Input "GATEWAY".7Step Input "DNS CONFIGURATION".17Step Finalize "ADVANCED".18Step Reconnect the network.19Step Finalize the setting.Step - Setting of "ADVANCED".Step Enable or disable "DHCP".If "Disabled" (without check mark)If "Enabled" (with check mark)4. Setting the LAN Setting of ProjectorSetting the LAN Setting of Projector4