03. Projectng an Image (Basc Operaton)Manual OperatonPlace your projector on a flat level surface and ensure that theprojector is square to the screen.[Adjust the Tilt Foot]Lift the front edge of the projector to center the image verti-cally. (→ page 21)[Zoom]Use the ZOOM lever to adjust the image size on the screen.➌ Adjusting the Picture Size and PositionAutomatc Operaton[AUTO FOCUS]Just placing the projector on a flat level surface makes a fo-cused image. (→ page 22)TIP: If the projected image is distorted horizontally, move the projec-tor left or right to center the image horizontally on the screen.[AUTO KEYSTONE Correcton]Adjusting the height of a projected image or changing theprojection angle will result in the AUTO KEYSTONE functionquickly correcting the vertical distortion. (→ page 23)