NEC NP41G User Manual

Also see for NP41 - TECHNISCHE DATEN: Control commands Specifications Quick setup guide Quick setup guide User manual

Contents

NEC NP41G User Manual Manual pdf 18 page image

9This section describes how to set up your projector and how to connect video and audio sources.2. Installation and Connections➊ Setting Up the Screen and the ProjectorSelectng a LocatonThe further your projector is from the screen or wall, the larger the image. The minimum size the image can be is33" (0.84 m) measured diagonally when the projector is roughly 57 inches (1.44 m) from the wall or screen. Thelargest the image can be is 300" (7.6 m) when the projector is about 484 inches (12.3 m) from the wall or screen.Use the chart below as a rough guide.Your projector is simple to set up and use.But before you get started, you must first:➊ Set up a screen and the projector.➋ C o nne c t your c o m puter or vi d e oequipment to the projector. See pages12, 13, 14.➌ Connect the supplied power cable.See page 15.NOTE: Ensure that the power cable and any oth-er cables are disconnected before moving theprojector. When moving the projector or whenit is not in use, cover the lens with the lens cap.Distance (Unit: m/inch)Lens centerScreen Size (diagonal: inch)Screen Size (Unit: cm/inch)609.6(W)×457.2(H) / 240(W)×180(H)487.7(W)×365.8(H) / 192(W)×144(H)406.4(W)×304.8(H) / 160(W)×120(H)365.8(W)×274.3(H) / 144(W)×108(H)304.8(W)×228.6(H) / 120(W)×90(H)243.8(W)×182.9(H) / 96(W)×72(H)203.2(W)×152.4(H) / 80(W)×60(H)162.6(W)×121.9(H) / 64(W)×48(H)121.9(W)×91.4(H) / 48(W)×36(H)81.3(W)×61.0(H) / 32(W)×24(H)300"240"200"180"150"120"100"60"40"80"12.3/484.39.8/385.88.2/322.87.4/291.36.1/240.24.9/192.94.1/161.43.3/129.92.4/94.51.6/63.0NOTE:• The distances are indicated by intermediate values between tele and wide. Use as a rule of thumb.• The Zoom lever adjusts the image size up to +/-10%• For more details on throw distance, see next page.• Changing the image size starts the AUTO FOCUS to adjust the focus; changing the throw angle starts the Auto Keystone tocorrect the vertical keystone distortion.To the wall outlet.