Chapter 2Administration Setup16 ◆ Aspire Conference Bridge User GuideCONFIGURATIONTo access the system configuration page, click on the Configuration link. This page is only accessible to mem-bers of the admin and installer groups. However, the admin group will only be able to access the ìEmail Config-urationî window. The first page that is displayed contains the current system status information. Below thesystem information are the links to the pages that allow you to modify the system configuration.This page is displayed for Admin and Installer password levels, however, with the Admin pass-word, only the EMail Configuration can be edited (the other entries can only be edited with theInstaller password). For details on the Configuration items programmable by the Installer passwordlevel, refer to the Aspire Conference Bridge Manual, P/N 0893215.This screen displays the following settings pertaining to the Aspire Conference Bridge:● System Time (Time used by the Aspire Conference Bridge)● Kernel Version● RFS Version (Firmware)● MAC Address● IP Address (To access the Aspire Conference Bridge)● Netmask Address (Subnet mask address)● Gateway Address● Host Name● Domain Name● Nameserver Address● DHCP