NEC P232W-BK User Manual

Also see for MultiSync P232W: Specification Specifications Specification Specification

Contents

English-21EnglishDVI LONG CABLE(DVI input only)Compensates for image degradation caused by using a long DVI cable.There are 4 possible settings, with “0” being the lowest level of compensation and “3”being the highest level. The default setting is “1”.HDMI LONG CABLE*1(HDMI input only)Compensates for image degradation caused by using a long HDMI cable.There are 4 possible settings, with “0” being the lowest level of compensation and “3”being the highest level. The default setting is “1”.Tag4 AUTO ADJUST* 2(Analog input only)Automatically adjusts the Image Position and H.SIZE settings and FINE settings.Press “SELECT” to activate Auto Adjustment. Please use test pattern, which is includedin the enclosed CD-ROM.SIGNAL ADJUST(Analog input only)Determines when the auto adjustment is activated automatically.The choices are “SIMPLE” and “FULL”. Press “LEFT” or “RIGHT” to select.H-size, Fine, H/V Position ContrastSIMPLE O XFULL O OO: Automatic Adjustment X: No Automatic AdjustmentNOTE: Automatic Adjustment does not work at resolutions less than 800x600 resolution.AUTO ADJUSTLEVEL(Analog input only)Determines the automatic adjustment level for AUTO ADJUST. The choices are “SIMPLE”,“FULL” and “DETAIL”. Press “LEFT” or “RIGHT” to select. Refer to the below table.Size, Fine, Position Contrast Black Level TimeSIMPLE O X X 1 secondFULL O O X 1.5 secondsDETAIL* O O O 5 secondsO: Automatic Adjustment X: No Automatic Adjustment* “DETAIL” activates automatic long cable (skew, peaking) adjustment.A-NTAA SW(Analog input only)The Advanced No Touch Auto Adjust function is able to recognize new signals evenwhen neither the resolution nor the refresh rate has changed. If several PCs areconnected to the monitor, and each transmit very similar (or even the same) signals interms of resolution and refresh rates, the monitor recognizes that there is a new signaland automatically optimizes the picture without the need for any action on the part of theuser.OFF: A-NTAA is disabled.ON: If a change in signal is detected A-NTAA will adjust the monitor to the optimalsettings for the new signal. If no change in the signal is detected then A-NTAA does notactivate. The screen will be blank while the monitor optimizes the signal.OPTION: Functions the same as ON, except that the screen does not go blank when themonitor makes adjustments for changes in signal, allowing the monitor to display the newsignal faster. When using an external switching device to connect 2 or more PCs to themonitor, using the ON or OPTION settings is suitable.AUTO CONTRAST* 2(Analog input only)Adjusts the image displayed for non-standard video inputs. Press “SELECT” to adjust.Any adjustment requires the image to have white portions.CONTRAST(Analog input only)Adjusts the image brightness and contrast in relation to the background.Press “LEFT” or “RIGHT” to adjust.AUTO BLACK LEVEL*2(Analog input only)Automatically adjusts the black level. Any adjustment requires the image to have blackportions. Press “SELECT” to activate AUTO ADJUST.BLACK LEVEL(Analog input only)Adjusts the RGB black level by input signal level.VIDEO LEVEL*1(HDMI input only)NORMAL: For computer setting. Displays all input signals of 0-255 steps.EXPAND: For audio-visual equipment setting. Expands input signals of 16-235 steps to0-255 steps.AUTO: Auto setting depending on the input signal.Tag5 H.POSITION Controls Horizontal Image Position within the display area of the LCD.Press “LEFT” or “RIGHT” to adjust.V.POSITION Controls Vertical Image Position within the display area of the LCD.Press “LEFT” or “RIGHT” to adjust.H.SIZE(Analog input only)Adjusts the horizontal size of the screen.If the “AUTO ADJUST” function do not give you a satisfactory picture setting, a furthertuning can be performed using the “H.SIZE (V.SIZE)” function (dot clock). For this a Moirétest pattern could be used. This function may alter the width of the picture. Use LEFT/RIGHT Menu to center the image on the screen. If the H.SIZE (V.SIZE) is incorrectlycalibrated, vertical bands will appear. The image should be homogeneous.*1 Only for P232W*2 This item does not reset by FACTORY PRESET (Tag7).