2-14 System ConfigurationAdvanced Menu - Power Management SetupMenu Item Settings (default is bold)ACPI Standby State S1/POS, S3/STRSelect S1/POS for a low wake-up latency sleeping state. In theS3/STR mode, the CPU, cache, and chipset contexts are lost.USB Keyboard WakeupFrom S3Disabled, EnabledSelect Enabled to allow the system to wake up from a keyboardinput.PowerManagement/APMEnabled, DisabledSelect Enabled to enable Power Management and AdvancedPower Management (APM).Suspend Time Out(Minutes)Disabled, 1, 2, 4, 8, 10, 20, 30, 40, 50, 60Specifies the length of time of system inactivity while in Standbystate before entering Suspend power state.Power Button Function Suspend, On/OffSuspend sets the power switch for Suspend (Sleep) mode. Withpower on, pressing the switch once places the system in sleepmode. Pressing and holding the switch in for 4 seconds or moreturns power off.Restore on AC/PowerLossLast State, Power Off, Power OnThe Power On setting automatically turns power on after a powerloss. The Power Off setting requires the user to restart the systemwith the power button. The Last State setting restores the systemto the state where it was on power loss.Resume on Ring Disabled, EnabledThe Enabled setting automatically reboots the system when asignal is sent through a modem.Resume on LAN Disabled, EnabledThe Enabled setting automatically reboots the system when asignal is sent through a LAN.Resume on RTC Alarm Disabled, EnabledWhen Enabled, you can choose the time the system boots up (seethe following time settings).RTC Alarm Date 15, Every DateSets the day that the system boots up (when Resume on RTCAlarm is Enabled).RTC Alarm Hour 12, 1-00Sets real time clock alarm hour (when Resume on RTC Alarm isEnabled).
