NEC POWERMATE P - SERVICE MANUAL 1996 Service And Reference Manual

Also see for POWERMATE P: Manual

Contents

NEC POWERMATE P - SERVICE MANUAL 1996 Service And Reference Manual Manual pdf 33 page image

Technical Information 1-19SpeakersThe multimedia systems come with 20 watt, high-quality stereo speaker set, an AC adapter,and connecting wires. The speaker set features a volume control, base and treble controls,power on/off switch, power lamp, and a headphone jack. Volume is controlled from thespeaker or from the preinstalled sound system software provided with the Voyetraapplication program. The speaker set connects to the speaker line out jack on the back ofthe system.MicrophoneThe microphone that comes with the multimedia systems allows recording of voice andsound into computer data files. The microphone connects to the MIC jack located on theback of the system. The microphone works in conjunction with the Voyetra applicationprogram.PLUG AND PLAYThe system comes with a Plug and Play BIOS which supports Plug and Play technology.Plug and Play eliminates complicated setup procedures for installing Plug and Playexpansion boards. With Plug and Play, adding a Plug and Play expansion board is done byturning off the system, installing the board, and turning on the system. There are no jumpersto set and no system resource conflicts to resolve. Plug and Play automatically configuresthe board.POWER MANAGEMENTEach system comes with the power-saving features enabled. If the keyboard, mouse, ordrives are not used after 15 minutes, the screen goes blank and the system goes into apartial power shutdown. A blinking power lamp indicates that the system is in the power-saving mode. As soon as activity is detected, the system resumes where it left off.The system can be manually put into a Suspend power-saving mode by pressing the suspendbutton. The Suspend mode provides the greatest power savings by putting the system inmaximum power shutdown. When the system goes into Suspend mode, it saves data andsystem status and then shuts off power to all possible components. A blinking power lampindicates that the system is in the power-saving mode. As soon as activity is detected, thesystem resumes where it left off.The amount of inactive time is adjustable. Power management can also be disabled. Bothcan be set through Setup.