NEC POWERMATE VE - 07-1996 Manual

Contents

4-16 Setting System ParametersNOTEA Supervisor password might be required toselect parameters from the Integrated Peripheralsmenu.Use the legend keys to make your selections and exit tothe Main Menu. Use the table that follows to configureyour peripherals.Integrated Peripherals ParametersFEATURE OPTIONS DESCRIPTIONCOM A PortCOM B PortDisabledUser-selectable settingsAutoSelects a unique address and interruptrequest for the listed COM ports. Autoselects the next available combination.Factory settings:COM A default: 3F8, IRQ4COM B default: 2F8, IRQ3LPT Port Disabled378, IRQ 7 (default)User-selectablesettings AutoSelects a unique address and interruptrequest for the LPT port. Auto selectsthe next available combination.LPT ModeECPOutput only (default) Enables parallel port to functionnormally (Output only), bidirectionally,or in an enhanced capabilities port(ECP) mode. Check your printerdocumentation to set the correct LPTmode for your printer.ECP Channel DMA 0DMA 1DMA 3Available when ECP is selected for theLPT mode.