NEC PX-42XM4A User Manual

Also see for 50XM5A: Supplementary guide Specifications Installation guide

Contents

NEC PX-42XM4A User Manual Manual pdf 32 page image

En-31Enabling/disabling remote control wirelesstransmissionThis function enables/disables remote control wirelesstransmission.Example: Setting “OFF”On “IR REMOTE” of “OPTION3” menu, select “OFF”, thenpress the MENU/ENTER button.SEL. ADJ. RETURNOPTION 3 3 / 4PREVIOUS PAGETIMERPWR. ON MODECONTROL LOCKIR REMOTELOOP OUTREMOTE IDID NUMBERVIDEO WALLNEXT PAGE: OFF: OFF: OFF: ALL: ALLEXITInformation IR REMOTE settingsON: Enables remote control wireless transmission.OFF: Disables remote control wireless transmission.Set “OFF” to avoid unwanted control from other remotecontrols.ID number settingWhen using more than one of these displays, this functionsets ID numbers so that operation of the remote controldoes not cause multiple monitors to operate at the sametime.Example: Setting “2”On “ID NUMBER” of “OPTION3” menu, select “2”.SEL. ADJ. RETURNOPTION 3 3 / 4PREVIOUS PAGETIMERPWR. ON MODECONTROL LOCKIR REMOTELOOP OUTREMOTE IDID NUMBERVIDEO WALLNEXT PAGE: OFF: ON: OFF: ALL: 2EXIT* To reset back to ALLPress the CLEAR/SEAMLESS SW button.Information ID NUMBER settingsALL: ID NUMBER will not be set.1 to 256: ID NUMBER will be set. When the ID NUMBER have been setYou can also set ID NUMBER for each remote controlto operate the plasma display individually. To do so,see below.To set the ID number for the remote controlExample: Setting “2”Press the ID SELECT button on the remote control.The “ID SELECT” screen appears.On “ID NUMBER” of “ID SELECT” menu, select “2”.ADJ. RETURNEXITID SELECTPOSITION : 1ID NUMBER : 2* To reset back to ALLPress the CLEAR/SEAMLESS SW button.Loop Out settingWhen this feature is set to ON, the received signal will belooped out.Example: Setting “ON”On “LOOP OUT” of “OPTION3” menu, select “ON”.SEL. ADJ. RETURNOPTION 3 3 / 4PREVIOUS PAGETIMERPWR. ON MODECONTROL LOCKIR REMOTELOOP OUTREMOTE IDID NUMBERVIDEO WALLNEXT PAGE: OFF: ON: ON: ALL: ALLEXITInformation LOOP OUT settingsON: The received signal will be looped out via PC1terminal or VIDEO1 terminal.OFF: The received signal will not loop out.* Even if LOOP OUT is ON, signals won’t be sent out ifPOWER is being turned off. To connect another display...See page En-6. If the RGB/PC1 signal is present at the timethe power switched on...The RGB/PC1 input will be displayed regardless of thesetting of LOOP OUT.REMOTE ID settingSet the remote code to adapt the plasma monitor to theremote control.Example: Setting to “1”On the “REMOTE ID” of “OPTION3” menu, select “1”.SEL. ADJ. RETURNOPTION 3 3 / 4PREVIOUS PAGETIMERPWR. ON MODECONTROL LOCKIR REMOTELOOP OUTREMOTE IDID NUMBERVIDEO WALLNEXT PAGE: OFF: ON: OFF: 1: ALLEXIT• Press and hold the POWER ON button, and release thebutton when the indication saying that the code is set isdisplayed. Or, press and hold the POWER STANDBYbutton, and release the button when the power is turnedoff.Information REMOTE ID settingALL: The remote code is not set.1 to 4: The specified remote code is applied.