NEC Display Solutions of America, Inc.PX803UL/PX1004UL Installation GuideDesktop and Ceiling Mount Rev 1.2www.necdisplay.com PX803UL/PX1004UL Page 1 of 12ContentsProduct Description, Lens Specs, Screen/Aspect RatioNotes Pg 1Distance Charts and Formulas Pg 2-3Ceiling Mount/Desktop Installation Pg 4Lens Shift Adjustable Range Pg 5Cabinet Dimensions Pg 6Cabinet Dimensions Pg 7Optional Lens Dimensions Pg 8Ventilation Requirements/Portrait Requirements Pg 9Regulatory Labels Pg 10Input Panel and Button Panel Pg 11Control Codes Pg 12Product DescriptionType: 1 chip DMD Reflection Type Dimensions: 19.7” (W) x 8.49” (H) x 23.0” (D)0.67 in. 2x LVDS DMD Weight: PX803UL: 61.7 lbs. / 28.0kgPX1004UL: 63.9 lbs. / 29.0kgResolution: 1920 x 1200 (16:10) Brightness: PX803UL: 8,000 LumensPX1004UL: 10,000 LumensFan Noise: PX803UL: 40 dB / 35dB @ 1 meterPX1004UL: 42 dB / 38dB @ 1 meterPower Consumption: PX803UL: 874W (max) BTU’s: PX803UL: 2983 BTU/hourPX1004UL: 1220W (max) BTU’s: PX1004UL: 4163 BTU/hourNetwork Ready, integrated wired and wireless adapterPowered: Lens Shift, Horizontal & Vertical /Zoom/ FocusLens SpecificationsNP39ML: Throw Ratio: ~ 0.38:1 Focal Length: 11.4mm NP19ZL: Throw Ratio: 2.22 -3.67:1 Focal Length: 32.9 – 54.2mmScreen Sizes: 85”-350” F/#: 1.85 Screen Sizes: 50-300” F/#: 1.86 – 2.48NP16FL: Throw Ratio: ~ 0.76:1 Focal Length: 11.6mm NP20ZL: Throw Ratio: 3.60 – 5.40:1 Focal Length: 52.8 – 79.1mmScreen Sizes: 50”-300” F/#: 1.85 Screen Sizes: 50-300” F/#: 1.85-2.5NP17ZL: Throw Ratio: 1.29 - 1.79:1 Focal Length: 18.7 – 26.5mm NP21ZL: Throw Ratio: 5.30 – 8.30:1 Focal Length: 78.5 -121.9mmScreen Sizes: 50”-300” F/#: 1.85 Screen Sizes: 50-300” F/#: 1.85-2.48NP18ZL: Throw Ratio: 1.73 – 2.27:1 Focal Length: 25.7 – 33.7mm NP31ZL: Throw Ratio: 0.75 – 0.93:1 Focal Length: 11.3 -14.1mmScreen Sizes: 50-300” F/#: 1.64-1.86 Screen Sizes: 50-300” F/#: 1.96-2.3Screen/Aspect Ratio4:3, 16:9 and 16:10 screens are fully supported with proper aspect ratio control for both type sources using NEC developed scalingtechnology. Menu selections have settings for each screen type and aspect ratio control for each source type.Notes For screen sizes not indicated on the projection tables, use the formulas below.If the figures on the tables do not match the results of formulas, use the figures in the table. Distances are in inches, for millimeters multiply by 25.4. Distances may vary 5%.