NEC PlasmaSync 4205W User Manual

Contents

NEC PlasmaSync 4205W User Manual Manual pdf 23 page image

16Watching computer images with awide screenSwitch to the wide screen mode to expand the 4 : 3 imageto fill the entire screen.1. Press the "WIDE / AUTO WIDE" button on the remotecontroller.Informationm Supported resolution• When 800 dot2600 line signals are input, they areconverted to 640 dot2480 line or 853 dot2480 linesignals.• When 1024 dot2768 line signals are input, they areconverted to 614 dot2460 line or 853 dot2460 linesignals.• When 1280 dot21024 line signals are input, they areconverted to 640 dot2478 line.See page 44 for details on the display output of thevarious vesa signal standards supported by the moni-tor.• When 852 dot2480 line wide VGA (*) signals witha vertical frequency of 60 Hz and horizontal frequencyof 31.72 kHz are input, select "WIDE" for the "RGBSELECT" setting. Since selecting an 8482480 sig-nal automatically displays the image in correct size,it is not necessary to change the RGB SELECT set-ting.* "IBM PC/AT" and "VGA" are registered trademarks of IBM, Inc.of the United States.The picture has the same size as the normal computer im-age.FULL size screenThe image is expanded in the horizontal direction.When using a graphic accelerator boad that is capable ofdisplaying 8482480.FULL size screen2. Within 3 seconds ...Press the "WIDE/AUTO WIDE" button again.The screen size switches as follows:→ NORMAL → FULL NORMAL size screen (4:3)