P LASMA M ONITOR † 35Information Screen (DISPLAY MODE)This permits a check of the signal (data) that is currently being input.Set [OSD MODE] to [PRO] on the configuration menu, then perform the following operations.Preparation Press the PROCEED button to display the main menu.1 Align the cursor with2Move the cursor left and right withthe POSITION/CONTROL buttons.SOURCE INFO.RGB1H-FREQ.V-FREQ.H-POL.V-POL.31.5kHz60.0HzNEGPOSPress the EXIT buttonThis removes the menu.Note:There is a slight error between the vertical frequency (V-FREQ.) displayedon the information screen and the actual vertical frequency of the con-nected input signal.A +/-3 Hz error exists for signals with a vertical frequency between 60 Hzand 70 Hz, and a +/-5 Hz error exists for signals with a vertical frequencyabove 70 Hz.Please regard the frequency indications of the information screen in termsof reference values only.Information Screen When RGB input is selected[SOURCE INFO.]:RGB 1, RGB 2, RGB 3,DVD/HD[H-FREQ.] : Horizontal frequency(kHz)[V-FREQ.] : Vertical frequency (Hz)[H-POL.] : Polarity of horizontalsync signalNEG (Negative)POS (Positive)[V-POL.] : Polarity of vertical syncsignalNEG (Negative)POS (Positive) When VIDEO input is selected[SOURCE INFO.] :VIDEO, SCART[MODE] : Color system standardNTSC, PAL, SECAMSOURCE INFO.RGB1H-FREQ.V-FREQ.H-POL.V-POL.31.5kHz60.0HzNEGPOSSOURCE INFO.VIDEOMODE : NTSCNote:[NTSC] is displayed for 4.43 NTSC.Note:[NO SIGNAL] is displayed when no signal is present.
