NEC PlasmaSync 42VR5 Operation Manual

Also see for 42XR3: Supplementary guide Supplementary guide Brochure Installation guide Model information

NEC PlasmaSync 42VR5 Operation Manual Manual pdf 9 page image

9A AC INConnect the included power cord here.B EXT SPEAKER L and RConnect speakers (optional) here. Maintain the correctpolarity. Connect the (positive) speaker wire to theEXT SPEAKER terminal and the (negative)speaker wire to the EXT SPEAKER terminal onboth LEFT and RIGHT channels.Please refer to your speaker’s owner’s manual.C VIDEO1, 2, 3 (BNC, RCA, S-Video)Connect VCR’s, DVD’s or Video Cameras, etc. here.D AUDIO1, AUDIO2, AUDIO3These are audio input terminals.The input is selectable. Set which video image to allotthem from the audio menu screen.E DVD1 / HD1Connect DVD’s, High Definition or Laser Discs, etc.here.F DVD2/ HD2, RGB2DVD2/ HD2: You can connect DVDs, HighDefinition sources, Laser Discs, etc.here.This input can be set for use with anRGB or component source. (see page21)RGB2: You can connect an analog RGB signaland the syncronization signal.G RGB1 (D-Sub)Connect an analog RGB signal from a computer, etc.here.H DVD3/HD3, RGB3 (DVI)Connect a digital signal (TMDS) from a source with aDVI output.This input can be set for use with an RGB3 or DVD3/HD3 source. (see page 22)I EXTERNAL CONTROL (D-Sub)This terminal is used when operating and controllingthe monitor externally (by external control).Rear View/ Terminal BoardA BDCEFGHI