NEC PlasmaSync 42XM4 User Manual

Also see for PlasmaSync 42XM4: Supplementary guide Supplementary guide Installation guide User manual Specifications

Contents

NEC PlasmaSync 42XM4 User Manual Manual pdf 25 page image

En-24Information RGB SELECT modesAUTO: Select the suitable mode for the specificationsof input signals as listed in the table “Computer inputsignals supported by this system” on page En-39.The others: The available resolutions are shown.See page En-39 for the details of the above settings.Setting high definition images to the suitablescreen sizeUse this procedure to set whether the number of verticallines of the input high definition image is 1035 or 1080.Example: Setting the “HD SELECT” mode to “1035I”On “HD SELECT” of “OPTION1” menu, select “1035I”.SEL. ADJ. RETURNOPTION 1 1 / 4OSMBNC INPUTD-SUB INPUTRGB SELECT: AUTOHD SELECTINPUT SKIPALL RESETNEXT PAGE: RGB: RGB: 1035I: OFF: OFFEXITInformation HD SELECT modesThese 3 modes are not displayed in correct imageautomatically.1080B: Standard digital broadcasts1035I: Japanese “High Vision” signal format1080A: Special Digital broadcasts (for example :DTC100)Setting the Input SkipWhen this is ON, signals which are not present will beskipped over and only pictures whose signals are beingtransmitted will be displayed.This setting is valid only for the INPUT SELECT buttonon the unit.Example: Set to “ON”On “INPUT SKIP” of “OPTION1” menu, select “ON”.SEL. ADJ. RETURNOPTION 1 1 / 4OSMBNC INPUTD-SUB INPUTRGB SELECT: AUTOHD SELECTINPUT SKIPALL RESETNEXT PAGE: RGB: RGB: 1080B: ON: OFFEXITInformation INPUT SKIP settingsOFF: Regardless of the presence of the signal, scanand display all signals.ON: If no input signal is present, skip that signal.* “SETTING NOW” will appear during the input search.Resetting to the default valuesUse these operations to restore all the settings (PICTURE,AUDIO, IMAGE ADJUST, OPTION1~4, etc) to thefactory default values.Refer to page En-18 for items to be reset.On “ALL RESET” of “OPTION1” menu, select “ON”, thenpress the MENU/ENTER button.SEL. RETURNOPTION 1 1 / 4OSMBNC INPUTD-SUB INPUTRGB SELECT: AUTOHD SELECTINPUT SKIPALL RESETNEXT PAGE: RGB: RGB: 1080B: OFF: ONEXITMENU/ENTER OKALL RESETSETTING NOWWhen the “SETTING NOW” screen disappears, then all thesettings are restored to the default values.