NEC PlasmaSync 42XM5 User Manual

Also see for 42XM5 - PlasmaSync - 42" Plasma Panel: Supplementary guide Supplementary guide Brochure & specs Installation guide User manual

Contents

NEC PlasmaSync 42XM5 User Manual Manual pdf 30 page image

En-29Setting the screen size for S1/S2 video inputIf the S-video signal contains screen size information, theimage will be automatically adjusted to fit the screen whenthis S1/S2 is set to AUTO.This feature is available only when an S-video signal isinput via the VIDEO3 terminal.Example: Setting “S1/S2” to “AUTO”On “S1/S2” of “OPTION2” menu, select “AUTO”.SEL. ADJ. RETURNOPTION 2 2 / 4PREVIOUS PAGEPWR. MGT.CINEMA MODELONG LIFEGRAY LEVELS1/S2PICTURE SIZEDVI SET UPPROTOCOL SETCLOSECAPTIONCAPTION CONTNEXT PAGE: OFF: ON: 3: AUTO: ON: OFF: OFF: LOWEXITInformation S1/S2 settingsAUTO: Adjusts the screen size automatically accordingto the S1/S2 video signal.OFF: Turns the S1/S2 function off.Setting the picture size for RGB input signalsUse this procedure to switch the setting to “ON” or “OFF”.* This function is available only for 50 and 60 inch types.Example: Setting the “PICTURE SIZE” mode to“OFF”On “PICTURE SIZE” of “OPTION2” menu, select “OFF”.SEL. ADJ. RETURNOPTION 2 2 / 4PREVIOUS PAGEPWR. MGT.CINEMA MODELONG LIFEGRAY LEVELS1/S2PICTURE SIZEDVI SET UPPROTOCOL SETCLOSECAPTIONCAPTION CONTNEXT PAGE: OFF: ON: 3: OFF: OFF: OFF: OFF: LOWEXITSetting the signal and black level for DVIsignalChoose the signal for the DVI connector (PC or STB/DVD) and set the black level.Example: Setting the “PLUG/PLAY” mode to “STB/DVD”On “OPTION2” menu, select “DVI SET UP”, then press theMENU/ENTER button.The “DVI SET UP” screen appears.On “PLUG/PLAY” of “DVI SET UP” menu, select “STB/DVD”.SEL. ADJ. RETURNDVI SET UPEXITPLUG/PLAYBLACK LEVEL: STB/DVD: HIGHInformation PLUG/PLAY settingsPC: When connected to the PC signal.BLACK LEVEL is set to “LOW” automatically.STB/DVD: When connected to the SET TOP BOX, DVD etc.BLACK LEVEL is set to “HIGH” automatically. BLACK LEVEL settingsLOW: When connected to the PC signal.HIGH: When connected to the SET TOP BOX, DVD etc.Change “HIGH” into “LOW” if the black level appears gray.Setting the Protocol setUse this setting when connecting a device which usesspecial protocol for RS-232C communication.Example: Setting “ON”On “PROTOCOL SET” of “OPTION2” menu, select “ON”.SEL. ADJ. RETURNOPTION 2 2 / 4PREVIOUS PAGEPWR. MGT.CINEMA MODELONG LIFEGRAY LEVELS1/S2PICTURE SIZEDVI SET UPPROTOCOL SETCLOSECAPTIONCAPTION CONTNEXT PAGE: OFF: ON: 3: OFF: ON: ON: OFF: LOWEXITInformation PROTOCOL SET settingsON: When special protocol is used.OFF: When NEC protocol is used (normal).* Consult your dealer for details of protocol.