NEC PlasmaSync 50XM3 Operation Manual

Also see for PlasmaSync 50XM3: Supplementary guide Operation manual Brochure & specs Installation guide Installation guide

Contents

NEC PlasmaSync 50XM3 Operation Manual Manual pdf 6 page image

6SpecificationsScreen Size 43.5"(H)24.5"(V) inches1106(H)622(V) mmdiagonal 50"Aspect Ratio 16 : 9Resolution 1365(H)768(V) pixelsPixel Pitch 0.032"(H)0.032"(V) inches0.81(H)0.81(V) mmColor Reproduction 256 levels, 16,770,000 colorsSignalsSynchronization Range Horizontal : 15.5 to 110 kHz(automatic : step scan)Vertical : 50.0 to 120 Hz(automatic : step scan)Input Signals RGB, NTSC (3.58/4.43), PAL (B,G,M,N),PAL60, SECAM, HD*1 , DVD*1 , DTV*1Input Terminals (VIDEO1 and RGB1 can also be used as OUTPUT terminals)RGBVisual 1 (Analog) mini D-sub 15-pin1Visual 2 (Analog) BNC (R, G, B, H/CS, V)1* 2Visual 3 (Digital) DVI-D 24-pin1* 3VideoVisual 1 BNC1Visual 2 RCA-pin1Visual 3 S-Video: DIN 4-pin1DVD/HD/DTVVisual 1 RCA-pin (Y, PB[CB], PR[CR])1* 1Visual 2 BNC (Y, PB[CB], PR[CR])1*1, *2Audio Stereo RCA3 (Selectable)External Control D-sub 9-pin1 (RS-232C)Sound output 9W+9W at 6 ohmPower Supply AC120V 50/60HzCurrent Rating 6.4A (maximum)Power Consumption 480W (typical)Dimensions 48.1 (W)30 (H)3.8 (D) inches1222 (W)736 (H)96(D) mmWeight 50XM3A: 96.6 lbs / 43.9 kg (without stand)50XM3A/S: 97.9 lbs / 44.5 kg (without stand)Environmental ConsiderationsOperating Temperature 0°C to 40°C / 32°F to 104°FHumidity 20 to 80% (no condensation)Altitude 0 to 9180 feet / 0 to 2800 mStorage Temperature -10°C to 50°C / 14°F to 122°FHumidity 10 to 90% (no condensation)Altitude 0 to 9840 feet / 0 to 3000 mFront Panel User Controls Power on/off, Input source select,Volume up/down/ OSM controlRemote Control Functions Power on/off, Input source select, OSMcontrol,Volume up/down, Cursor (UP,DOWN,LEFT, RIGHT), Pointer, Zoom up/down, Off timer, Wireless/ Wired remotecontrolOSM Functions Picture (Contrast/Brightness/Sharpness/ Color/Tint/Picture mode/Noise reduction/Color temperature/White balance/Gamma/Low tone/Color tune), Audio(Bass/Treble/Balance/Audio input), Image Adjust(Aspect mode/V-Position /H-Position/V-Height /H-Width/Auto Picture/Fine picture/Picture adjustment),Option1 (OSM/BNC Input/D-Sub Input/RGB Select/HD Select/Input Skip/All Reset), Option2 (Powermanagement/Cinema mode/Long life [PLE, Orbiter,Inverse, White, Screen wiper, Soft focus]/Gray level/S1/S2/Picture size/DVI Set up), Option3 (Timer Poweron mode/Control lock/IR Remote/Loop out/IDnumber/Video wall [Divider, Position, Disp. mode,Auto ID, Image adjust, Power on delay, PLE link,Timer]), Advanced OSM, Language*, Color system,Source information*English, German, French, Italian, Spanish, Swedish,ChineseThe features and specifications may be subject to change withoutnotice.*1 HD/DVD/DTV input signals supported on this system480P (60 Hz) 480I (60 Hz) 525P (60 Hz)525I (60 Hz) 576P (50 Hz) 576I (50 Hz)625P (50 Hz) 625I (50 Hz) 720P (60 Hz)1035I (60 Hz) 1080I (50 Hz) 1080I (60 Hz)*2 The 5-BNC connectors are used as RGB/PC2 and HD/DVD2 input.Select one of them under “BNC INPUT”.*3 50XM3A is not compatible with HDCP.50XM3A/S is compatible with HDCP.Supported Signals• 640480P @ 59.94/60Hz• 1280720P @ 59.94/60Hz• 19201080I @ 59.94/60Hz• 720480P @ 59.94/60Hz• 720480I @ 59.94/60HzNote: In some cases a signal on the plasma monitor may not be displayedproperly. The proglem may be an inconsistency with standards fromthe source equipment (DVD, Set-top box, etc...). If you do experiencesuch a problem please contact NEC Solutions (America), Inc. and alsothe manufacturer of the source equipment.Units are in inch(mm)3.8"(96)1.5"(38) 2.3"(58)48.1" (1222)30" (736)43.5" (1106)24.5" (622)Other Features Motion compensated 3D Scan Converter (NTSC,PAL, 480I, 576I, 525I, 625I, 1035I, 1080I), 2-3pull down Converter (NTSC, 480I, 525I, 1035I,1080I (60Hz)), 2-2 pull down Converter (PAL,576I, 625I, NTSC, 480I, 525I), Digital ZoomFunction (100-900% Selectable), Video Wall 2×2/3×3 multi screen, Self Diagnosis, Anti ImageBurn (PLE LOCK1~3, INVERSE, WHITE,ORBITER (Auto1,2/Manual), SCREEN WIPER),Color Temperature select (high/mid/mid low/low,user has 4 memories), Control lock (Except powerSW), Auto Picture, Input Skip, Color Tune, LowTone (3 mode), Auto ID, Programmable Timer,Gamma Correction (4 mode), Loop throughinterface, Plug and play (DDC1, DDC2b, RGB3:DDC2b only)Accessories Remote control with two AAA batteries, Powercord, Manuals, Safety metal fitting parts, Ferritecores, Bands, Cable clampsRegulations 50XM3A:UL Approved (UL 60950/CSA C22.2No.60950-00)DOC Canada requirementsMeets FCC Class A requirements50XM3A/S:UL Approved (UL 60950 and UL65000/CSAC22.2 No.60950-00/ CAN/CSA-E60065-00)DOC Canada requirementsMeets FCC Class B requirements50XM3A: Bezel color is gray.50XM3A/S: Bezel color is silver.

/ 8

Related manuals for NEC PlasmaSync 50XM3