NEC Corporation of AmericaVisual Systems Division50XM6 Installation Guide50” Plasma Display Rev 1.0PX-50XM6 Page 1 of 11Contents:Product Description and Notes Page 1Ventilation Requirements Page 2Display DimensionsFront, Top, Bottom & Right Side Page 3Rear Page 4Display Dimensions w/Optional Speakers and Stand Page 5Optional Speakers and Stand Dimensions__ Page 6Dimensions w/Optional Wall Mount Page 7Dimensions w/Optional Portrait Wall Mount Page 8Dimensions w/Optional Ceiling Mount Page 9Connections Page 10Control Codes Page 11Product DescriptionType: Plasma Display Screen Surface: Anti-ReflectiveResolution: 1365x768 Dimensions: 48.11” (W) x 28.98” (H) x 3.90” (D)Aspect Ratio: 16:9 Weight: 91.5 lbsColor Correction: NEC AccuCrimson (in front filter) FCC: Class BNotesThis document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended tobe a step-by step procedure for installation.Any ceilings or walls must be strong enough to support the display and the installation must be in accordance with any localbuilding codes. All mounts should make secure contact to wood studs.4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally tofill the screen using the menus (see “Aspect Modes” in menus and user manual).Distances are in inches, for millimeters multiply by 25.4.Distances may vary ±5%.Maximum Tilt AnglesBelow are the maximum angles that the display can be tilted in both landscape and portrait modeLandscape 30°Max TiltPortrait 10°www.necvisualsystems.com