NEC Solutions (America), Inc.Visual Systems Division50XR4 Installation Guide50” Plasma Display v1.3ContentsProduct Description and Notes Page 1Ventilation Requirements Page 2www.necvisualsystems.com 50XR4 Page 1 of 10Display DimensionsFront, Top & Bottom Page 3Rear, Left & Right Side Page 4Display Dimensions w/Optional Speakers and Stand Page 5Dimensions w/Optional Flat Wall Mount Page 6Dimensions w/Optional Tilt Wall Mount Page 7Dimensions w/Optional Ceiling Mount Page 8Connections Page 9Control Codes Page 10Product DescriptionType: Plasma Display Screen Surface: Anti-ReflectiveResolution: 1365x768 Color Correction: NEC CCF (Capsulated Color Filter, in panel)Aspect Ratio: 16:9 and AccuCrimson (in front filter)FCC: Class B Dimensions: 48.1”(W) x 29.0”(H) x 3.8”(D)DVI Input: HDCP capable Weight: 97 lbsNotes This document is intended to be used as a reference guide to supply useful information for a design or installation. It is notintended to be a step-by step procedure for installation. Any ceilings or walls must be strong enough to support the display and the installation must be in accordance with any localbuilding codes. All mounts should make secure contact to wood studs. 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretchedhorizontally to fill the screen using the menus (see “Aspect Modes” in menus and user manual). Distances are in inches, for millimeters multiply by 25.4. Distances may vary ±5%.Maximum Tilt AnglesBelow is the maximum angle that the display can be tiltedMax TiltLandscape 30°