NEC PlasmaSync 60XR5A User Manual

Also see for PlasmaSync 60XR5A: Supplementary guide Brochure

Contents

NEC PlasmaSync 60XR5A User Manual Manual pdf 4 page image

SpecificationsScreen Size 51.9 inches(H)29.2 inches(V)1319 mm(H)742 mm(V)diagonal 60 inchesAspect Ratio 16 : 9Resolution 1365 pixels(H)768 pixels(V)Pixel Pitch 0.038 inches(H)0.038 inches(V)0.97 mm(H)0.97 mm(V)SignalsSynchronization Range Horizontal : 15.5 kHz to 110.0 kHz(automatic : step scan)Vertical : 50.0 Hz to 120.0 Hz(automatic : step scan)Input Signals RGB, NTSC (3.58/4.43), PAL (B,G,M,N),PAL60, SECAM, HD*1 , DVD*1Input TerminalsPC/RGBVisual 1 (Analog) mini D-sub 15-pin1VideoVisual 1 RCA1Visual 2 S-Video: DIN 4-pin1DVD/HDVisual 1 RCA-pin (Y, Cb/Pb, Cr/Pr)1* 1Visual 2 RCA-pin (Y, Cb/Pb, Cr/Pr)1*1HDMI HDMI connector2* 2Audio Stereo RCA3 (Selectable)External Control D-sub 9-pin1 (RS-232C)Remote In Mini jack1Remote Out Mini jack1Sound output 9 W+9 W at 6 ohmPower Supply AC100 V to 240 V 50 Hz/60 HzCurrent Rating 7.0 A (maximum)Power Consumption 440 W (typical)Dimensions 58.1 inches(W)34.7 inches(H)5.0 inches(D)1476 mm(W)880 mm(H)126 mm(D)Weight 135.6 lbs / 61.5 kg (without stand)Environmental ConsiderationsOperating Temperature 0 °C to 40 °C / 32 °F to 104 °FHumidity 20 % to 80 % (no condensation)Storage Temperature -10 °C to 50 °C / 14 °F to 122 °FHumidity 10 % to 90 % (no condensation)Other Features Motion compensated 3D Scan Converter (NTSC,PAL, 480I, 576I, 525I, 625I, 1035I, 1080I), 2-3pull down Converter (NTSC, 480I, 525I, 1035I,1080I (60 Hz)), 2-2 pull down Converter (PAL,576I, 625I, NTSC, 480I, 525I), Digital Zooming(100 % to 900 % Selectable), Self Diagnosis viaRS232C, PDP Saver (PEAK BRIGHT,ORBITER, INVERSE, WHITE, SCREENWIPER, SOFT FOCUS, etc.), Color TemperatureSelect (high/middle/middle low/low, user has 4memories), Auto Picture Adjust, Input Skip, ColorTune, Gamma Correction (4 modes), Plug andplay (DDC1, DDC2b, HDMI: E-DDC),Enhanced Split Screen, Protocol Set, etc.Accessories Power cord (1), Remote control (1), AAAbatteries (2), Manuals (Model Informationand Operation), Ferrite cores for power cord(2), bands for power code (2), Cableclampers (3), beads bands (3), Ferrite corefor remote cable (2).Regulations UL 60065, CAN/CSA-C22.2 No.60065-03,FCC class B, ICES-003 class BThe features and specifications may be subject to change withoutnotice.*1 DVD/HD input signals supported on this system.480P (60 Hz) 480I (60 Hz) 525P (60 Hz)525I (60 Hz) 576P (50 Hz) 576I (50 Hz)625P (50 Hz) 625I (50 Hz) 720P (60 Hz)720P (50 Hz) 1035I (60 Hz) 1080I (50 Hz)1080I (60 Hz) 1080P (50 Hz) 1080P (60 Hz)*2 HDMI input signals supported on this system.Supported Signals• 640480P @ 59.94/60 Hz • 19201080I @ 50 Hz• 1280720P @ 59.94/60 Hz • 720576P @ 50 Hz• 19201080I @ 59.94/60 Hz • 1440 (720)576I @ 50 Hz• 720480P @ 59.94/60 Hz • 1280720P @ 50 Hz• 1440 (720)480I @ 59.94/60 HzNote: In some cases a signal on the plasma monitor may not be displayedproperly. The problem may be an inconsistency with standards fromthe source equipment (DVD, Set-top box, etc...). If you do experiencesuch a problem please contact NEC Corporation of America and alsothe manufacturer of the source equipment.Units are in inch(mm)5.0"(126)1.9"(49) 3.0"(77)58.1" (1476)34.7" (880)51.9" (1319)29.2" (742)En-2For the operation of your plasma monitor,refer to “Operation Manual”.