NEC PlasmaSync 61XM2 Operation Manual

Also see for PlasmaSync 61XM2: Supplementary guide Operation manual Brochure & specs Installation guide Brochure

Contents

NEC PlasmaSync 61XM2 Operation Manual Manual pdf 4 page image

4WarningNot for use in a computer room as defined in the Standardfor the Protection of Electronic Computer/ Data ProcessingEquipment ANSI/NFPA 75.Models: PX-61XM2AThis equipment has been tested and found to comply withthe limits for a Class A digital device, pursuant to Part 15 ofthe FCC Rules. These limits are designed to providereasonable protection against harmful interference whenthe equipment is operated in a commercial environment.This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used inaccordance with the instruction manual, may cause harmfulinterference to radio communications. Operation of thisequipment in a residential area is likely to cause harmfulinterference in which case the user will be required to correctthe interference at his own expense.Models: PX-61XM2A/SThis equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to Part 15 ofthe FCC Rules. These limits are designed to providereasonable protection against harmful interference in aresidential installation. This equipment generates, uses, andcan radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is noguarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the followingmeasures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment andreceiver.• Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.• Consult the dealer or an experienced radio / TV technicianfor help.NOTE:When you connect a computer to this monitor, use an RGBcable including the ferrite core on both ends of the cable.And regarding DVI and power cable, attach the suppliedferrite cores. If you do not do this, this monitor will notconform to mandatory FCC standards.Attaching the ferrite cores:Set the ferrite cores on both ends of the DVI cable (notsupplied), and both ends of the power cable (supplied).Close the lid tightly until the clamps click.Use the band to fasten the ferrite core (supplied) to theDVI cable.DVI cable (not supplied)core (small) core (small)Connectorband bandPower cable (supplied) core (large)core (large)Important InformationCaution61XM2A/S is for use only with following option units. Usewith other optional units is capable of resulting in instabilitycausing possible.Manufacturer’s name: NEC Plasma Display CorporationStand: PX-61ST1U, PX-61ST1U/S, PX-61XM1U-STWall Mount Unit: PX-W3UTilt Mount Unit: PX-T3UCeiling Mount Unit: PX-C3U