3. Standard FeaturesExpress5800/R320c-E4, R320c-M4 User's Guide38Chapter 1 General Description3.3 Management FeaturesNEC ESMPRO Agent, which is provided in EXPRESSBUILDER(Windows) or in ft Control Software InstallDVD(VMware), enables you to collectively manage the state of your systems. You can also monitor the serverstates from a management PC on network where NEC ESMPRO Manager is installed.The features available on this server are as shown in the table below.Function Availability DescriptionShows physical hardware information.Memory bank △ Shows physical memory information.Device info △ Shows information specific to the server.HardwareCPU △ Shows physical CPU information.System ○ Shows logical CPU information and monitors the load factor.Shows logical memory information and monitors the status.I/O device ○ Shows information on I/O devices (serial ports, keyboard, mouse,and video).Monitors temperatures, fans, voltage, power supply, and others.Temperature △ Monitors the temperature inside of the chassis.Fan △ Monitors the fans.Voltage △ Monitors the voltage inside of the chassis.Power supply △ Monitors the power supply unit.SystemenvironmentCover / Door X Monitors Chassis Intrusion (open/close state of chassis cover ordoor).Software ○ Shows service, driver, and OS information.Network ○ Shows network (LAN) information and monitors packets.BIOS △ Shows BIOS information.Local polling ○ Monitors the values of MIB items obtained by NEC ESMPROAgent.Storage × Monitors controllers and storage devices including hard diskdrives.File system ○ Shows the file system configuration and monitors the free space.△ Monitors OS stall using the Watch Dog Timer.Others*△ Performs alert processing after an OS STOP error occurs.: Supported. : Windows Only supported. : Unsupported.*: Not displayed on the NEC ESMPRO Manager screen.Tips NEC ESMPRO Manager and NEC ESMPRO Agent are supplied with the server asstandard. For how to install and use each software component, refer to theexplanation of the component.