NEC SL1000 Programming Manual

Also see for SL1100: User guide User guide User guide User guide Installation manual

Contents

NEC SL1000 Programming Manual Manual pdf 86 page image

Program 11 : System Numbering11-09 : Trunk Access CodeLevelINDescriptionUse Program 11-09 : Trunk Access Code to assign the trunk access code. The trunk access codecan be set from 1 ~ 8 digits which is defined to type 3 and 4 in Program 11-01. This is the code exten-sion users dial to access Automatic Route Selection (ARS/F-Route). The Individual Trunk Access Codeis used when Trunk Group Routing is desired for an outgoing line.Caution!The digit 9 is defined in Program 11-01 as Dial Type ( ) with the Number of Digits Required set to ( ). If you change thetrunk access code in Program 11-09, you must make the corresponding changes in Program 11-01.Input DataItem No. Trunk Access Code Description Default Related Program01 Dial (Up to four digits) Use this program toassign the trunk ac-cess code. This is thecode extension usersdial to access Auto-matic Route Selection(ARS/F-Route).9 • 11-01 : SystemNumbering• 14-01 ~ 07 : BasicTrunk Data Setup• 14-05 : TrunkGroup• 14-06 : TrunkGroup Routing• 21-02 : TrunkGroup Routing forExtensions02 2nd Trunk Route AccessCodeUse this program todefine additional trunkaccess codes.When a user dials theAlternate Trunk RouteAccess Code, the sys-tem routes their call tothe Alternate TrunkRoute.No setting • 11-01 : SystemNumbering• 14-01 ~ 07: BasicTrunk Data Setup• 14-05 : TrunkGroup• 14-06 : TrunkGroup Routing• 21-02 : TrunkGroup Routing forExtensions• 21-15 : IndividualTrunk Group Rout-ing for ExtensionsConditionsNoneFeature Cross Reference• Automatic Route Selection (ARS/F-Route)• Central Office Calls, Placing• Trunk Group RoutingISSUE 1.0SL1000/SL1100Program11Program 11 : System Numbering2-64