SL1100 Multi-Line TerminalQuick User GuideFor additional information search for “NEC SL1100 Multi-Line Terminal User Guide” in your web browserMAKING A CALLLift the Handset or press Speaker (For theremainder of this guide we will refer to lifting thehandset but pressing the Speaker key is also valid)• Dial the required internal number• For external calls, dial 0 first for an outsidelineHOLDAsk the caller to please hold:• Press Hold - hold key flashes.• You may replace handset if you wish.To retrieve a call:• Lift the handset.• Press the Flashing Line KeyTRANSFERWith a call in progress:• Press Transfer• Dial an extension, external number orprogrammed one-touch key and announcethe call when they answer (optional)• Replace the handsetNote: If the called extension is busy or does notanswer, press the Green Flashing Key to returnto your caller. If the extension answers andindicates that they do not wish to take the call,ask them to hang up and you will be put directlyback to the original caller.REDIALLast dialed number• Lift the handset and press #5 to initiate thecallRecently dialed numbers• Without lifting handset press Redial (RightCursor key).• Press the Cursor button up or down tosearch for the required number• Lift the handset to initiate the callCONFERENCEWith a call in progress (internal or external)• Press the More soft key and then the Confsoft key• Dial an internal or external number• When the third party answers, press theAdd soft keyRepeat the above 3 steps until all partiesare in the conference. Then press theBegin soft key to begin the conferenceNote: Any party may exit the conference byhanging up. As long as at least one of theparties is an extension on the phone system theconference will remain active.