Upgrading Your System 4-215.25-Inch Media DeviceCAUTIONCD-ROM devices contain a laser system and are classifiedas CLASS 1 LASER PRODUCTS. To use these devices,thoroughly read the documentation provided by the CD-ROM manufacturer, and keep the documentation for futurereference. In case of any trouble with a CD-ROM, pleasecontact your nearest service representative. To preventdirect exposure to the laser beam, do not try to open theenclosure. Use of controls or adjustments or performance ofprocedures other than those specified in the CD-ROMmanufacturer's documentation may result in hazardous0.radiation exposure.1. Power off the system, unplug the system power cord, and remove the appropriatesidepanel depending upon the bay you are installing the media device in and as describedearlier in this chapter.2. Open the front panel as described earlier in this chapter.CAUTIONObserve static precautions. Use an antistatic wirst strap.3. Remove the EMI metal shield and the filler panel covering the bay where you areinstalling a media device as shown below. The metal shield is released by pulling on thetabs at the left and right of the filler panel.Removing the EMI Metal Shield and the Filler Panel
