NEC U300X Installation Manual

Also see for U300X Series: Command guide Command guide User manual Specifications Quick setup guide

Contents

NEC U300X Installation Manual Manual pdf 1 page image

NEC Display Solutions of America, Inc.U300X Installation GuideDesktop and Ceiling Mount v1.3www.necdisplay.com U300X Page 1 of 10ContentsProduct Description, Lens Specs, Notes and Formulas Page 1Diagrams and Distance ChartsCeiling Mounted Installation Page 2Desktop Setup Page 3Cabinet DimensionsTop, Front and Right Side Page 4Bottom, Back and Left Side Page 5Optional Wall Mount Dimensions Page 6, 8Optional Wall Mount Dimensions cont. Page 7, 9Input Panel and Control Codes Page 10Product DescriptionType: 1 chip DMDTM Ultra Short Throw projector Dimensions: 16.8”(W) x 7.9”(H) x 16.0”(D)Weight: 14.3 lbsNative Resolution: 1024 x 768 (1024x576 for 16:9 screens) Screen Range: 63” – 85” Diagonal (4:3)Brightness: 3000 lumens Fan Noise: 36 dB / 32dB @ 1 meterPower Consumption: 360W (max) BTU’s: 1228 BTU/hourScreen/Aspect Ratio_Both 4:3 and 16:9 screens are fully supported with proper aspect ratio control for both type sources using NEC developedscaling technology. By selecting the screen type in the menus, Aspect Ratio control is reconfigured for that screen type.Notes For screen sizes not indicated on the projection charts, use the formulas below.If the figures on the tables do not match the results of formulas, use the figures in the table. All calculations are based on 4:3 aspect ratio. Distances are in inches, for millimeters multiply by 25.4. Distances may vary 5%.FormulasThe Projection Formulas use the image width for calculation. Image width is the same for all aspect ratios, only vertical image sizevaries. For proper projector placement, determine the image width for a desired screen size. Use the Screen Formulas below tocalculate all screen dimensions. Plug the screen width in for “W” in the Projection Formulas.Refer to the diagrams and charts for popular screen sizes on page 2 and 3.Definitions: 4:3 Screen Formulas:W = Screen width W = H x 4/3H = Screen height H = W x 3/4A = Distance between projector cabinet and screen Screen Diagonal = W x 5/4B = Vertical distance between projector foot and screen centerC = Throw distance 16:9 Screen Formulas:D = Vertical distance between projector foot and screen bottom W = H x 16/9(screen top for ceiling mounted application) H = W x 9/16Screen Diagonal = W x 18.868/16Projection Formulas:A = C-13.48B = 0.631WC = 0.377WD = 0.256W