182. Projecting an Image ( Basic Operation)Adjusting horizontal/vertical positionThe throw distance can affect the size and the height of the projected image. Before installing the projector, decidethe throw distance according to “Setting Up the Screen and the Projector” (→ page 75)It is recommended to display the test pattern while adjusting the image. (→ page 64)1. Move the projector back and forth and left and right so thatthe image fits the screen width.You can reduce the image size to 70% by using [DIGITAL ZOOM]from the menu.2. Place the projector so that it is parallel with the screen.If the top side of the image is not parallel with its bottom side, rotatethe projector slightly to adjust it. If the side of the image showsoutside the screen, move it to the center line of the screen.Adjusting the focus (Focus ring)• Rotate the focus ring until you obtain the best focus.Focus ring(view from the bottom)
