NEC UNIVERGE DT300 Series User Manual

Also see for DTL-8LD-1: Quick start user guide User guide

Contents

NEC UNIVERGE DT300 Series User Manual Manual pdf 24 page image

TO HOLD A CALL DT300 SeriesPress HOLD key. Held line wink flashes.Held stationnumberHOLD 20014:26 PM TUE 13 APR 2004Note: If held line appears on other DT Series stations,the associated LED flashes red slowly.To RetrieveLift handset or press Speaker key.Press held line. Use handset to converse.Note: Any station with this line appearance can retrievethe call.If unansweredAfter preprogrammed time, Automatic Recall is initi-ated.Visual and audible signal (rapid flash and ringburst) is sent to station that placed call on hold.Note: Hold shows as a flashing green LED on yourphone. The same line on other phones shows as aflashing red LED. Recall shows as a flashinggreen LED on your phone and flashing red LED onother phones with the same line.TO PLACE A CALL ON EXCLUSIVEHOLD DT300 SeriesPress HOLD key twice. Line appearance indi-cates interrupted wink.Held stationnumberE_HOLD 20014:26 PM TUE 13 APR 2004Note: If held line appears on other DT Series stations,LED remains steadily lit red.To RetrieveLift handset or press Speaker key.Press held line. Use handset to converse.Note: Only the DT Series that set Exclusive Hold optioncan retrieve the call.