NEC UNIVERGE NEAX 2000 IPS General Description Manual

Also see for UNIVERGE NEAX 2000 IPS: Installation guide User guide User guide User guide Reference guide

Contents

NEC UNIVERGE NEAX 2000 IPS General Description Manual Manual pdf 153 page image

CHAPTER 6 INSTALLATION, PROGRAMMING, AND MAINTENANCEUNIVERGE NEAX 2000 IPS General Description Page 149Issue 5System AdministrationIn this system, the Customer Administration Terminal (CAT) or Maintenance AdministrationTerminal (MAT) is used for programming the system data. The CAT is a digital multi-functiontelephone (Dterm) which is equipped with function keys, a dial pad and LCD and interfaces withthe system via the MP card. The Maintenance Administration Terminal (MAT) is a personalcomputer that provides an interface to the PBX via the system CPU card. The MAT PC musthave the MATWorX TM program properly installed to communicate with the PBX. MATWorXis required for system software registration and activation.Password EntryIn a system with password service, a maintenance person is required to enter an authorizationlevel number (Password Level) and appropriate password prior to engaging in programming thesystem data with the MAT/CAT. A maximum of eight (8) Password Levels can be set up. Thenumber of commands that the maintenance person can access is determined by the PasswordLevel.Resident System ProgramThis resident system program generates system data automatically according to the systemhardware configuration, thereby providing immediate operation and shorter programming time.When activated, the system scans hardware configuration (such as line/trunk card location) andassigns the system data (such as station numbers, trunk numbers, etc.) according to apredetermined generic program assignment.Service Conditions1. This service is applicable for equipment installed in PIM0 through PIM3.2. Data for any vacant slot is not assigned.3. Virtual stations are not assigned.4. A line/trunk card (PN-AUCA/PN-DK00/ /PN-4DAT/PN-4RSTF/PN-4VCTI) is notassigned, even if mounted.5. An application card is not assigned, even if mounted.6. No tenant assignment is provided. (Tenant 01 is assigned)