NEC UNIVERGE SV7000 User Manual

Also see for UNIVERGE SV7000: User guide User guide Programming manual User guide User guide

Contents

NEC UNIVERGE SV7000 User Manual Manual pdf 58 page image

– 54 –Call Forwarding – Don’t AnswerTo setPress Speaker. Receive dial tone.If setting for another station, press MULTILINE APPEARANCE.Press FWD-NA or dial “Call Forwarding – Don’t Answer” access code. Receive special dial tone.Dial destination station or external telephone number. Receive service set tone.FWD-NA LED lights (at your station or at the D term of the multiline station you are setting).Press Speaker. Call Forwarding – Don’t Answer is set.Using the Soft KeyPress FDN Soft Key. Receive special dial tone.Dial destination; wait for service set tone.“FORWARD SET” is displayed; Call Forwarding – Don’t Answer is set.To verify (with Dterm 4D/8D/16D/16LD/32D)If verifying for another station, press MULTILINE APPEARANCE while idle.Press FWD-NA.Display indicates the station number calls are forwarded to.Note 1: If recipient station is a D term 4D/8D/16D/16LD/32D, LCD displays:Note 2: Call Forwarding for Busy Line and Don’t Answer may be combined depending upon system programming.Note 3: With Soft Key operation, FDB flashes on the display.Forwardingstation4:26 PM TUE 13 APR 2004FORWARD SET 20004:26 PM TUE 13 APR 2004FORWARD SETMIC >>>Forwardingstation4:26 PM TUE 13 APR 2004FORWARD 2000