SV8100 Programming Manual 2 - 337Program22DescriptionUse Program 22-01 : System Options for Incoming Calls to define thesystem options for incoming calls.Program 22 : Incoming Call Setup22-01 : System Options for Incoming CallsLevel:INInput DataItemNo. Item Input Data Default Description RelatedProgram01 Incoming CallPriority 0 = Intercom CallPriority1 = Trunk CallPriority1 Determine if Intercom calls or trunkcalls have answer priority when bothare ringing simultaneously.15-02-2202 Incoming CallRing No AnswerAlarm0 = Disable (Off)1 = Enable (On)0 If enabled, an incoming call that ringslonger than the Ring No Answer Alarm(22-01-03), changes to a unique ringcadence to indicate that the call hasbeen ringing too long. If disabled, thisdoes not occur.22-01-0322-01-0403 Ring No AnswerAlarm Time 0~64800 (sec) 60 If a trunk rings a multiline telephonelonger than this time, the systemchanges the ring cadence. Thisindicates to the user that the call hasbeen ringing too long.22-01-0204 DIL No AnswerRecall Time 0~64800 (sec) 0 A DIL that rings its programmeddestination longer than this time divertsto the DIL No Answer Ring Group (setin Program 22-08).05 --- Not Used ---06 DID Ring-No-Answer Time 0~64800 (sec) 20 In systems with DID Ring-No-AnswerIntercept, this sets the Ring-No-Answertime. This is the time a DID call ringsthe destination extension beforererouting to the intercept ring group.22-1207 DID IncomingRing Group NoAnswer Time0~64800 (sec) 20
