NEC UX Series Installation Manual

Also see for MultiSync UX552: Installation guide Firmware update procedure User manual

Contents

NEC UX Series Installation Manual Manual pdf 15 page image

EnglishEnglish - 158. Pins, spacers and plastic spacersSome display models are supplied with pins, spacers and plastic spacers.With multiple screens configuration, installing the pins and the spacers makes it possible to secure a constant gap betweenthe displays.However, the pins can be installed only on the models that have pin holes of 6 mm in diameter in their bottom and rightsides.The pins cannot be used with the other models.Also, the pins, spacers and plastic spacers cannot be used for installation brackets that allow the display to move (Example:Pantograph mechanisms, slide mechanisms).Pin holeFront side(1) SpacersThe spacers supplied with the display can be installed in the screw holes on the top and left sides of the display.They are useful to prevent the display from coming into contact on their weaker sides with other displays in multiplescreens configuration. Therefore, we recommend installing these spacers in this configuration.However, it cannot be used for installation brackets that allow the display to move back and forth or left and right(Example: Pantograph mechanisms, slide mechanisms).Front sideSpacer[Installation locations]Example: Spacer installation with multiple screens configurationSpacer