NEC UX5000 Resource Manual

Also see for UX5000: User guide User guide Feature handbook Hardware manual Hardware manual

Contents

NEC UX5000 Resource Manual Manual pdf 33 page image

UX5000 IP Phone ManagerUX5000 IP Resource Manual 1 - 215.3 SecurityLockThe SecurityLock feature can lock or unlock the connected terminal(s). Thisoption is not available for the 2-Button or 6-Button IP Value terminals as theseterminals do not have the Lock button. There are two modes in theSecurityLock feature:1. Enable allows the user to change the status of the terminal security.zzzz All Clear – Returns the terminal password to default valuezzzz Unlock – One-time security release on the terminalzzzz Lock – Locks the Connected terminal(s)2. Disable the SecurityLock feature from being set from the terminal.Click on the check box for the terminal(s), select the SecurityLock optionfrom the Command drop-down list, and click the Execute button.From the Lock Mode drop-down list, select whether to enable or disable theuse of the lock mode feature for the terminal(s). If the option is disabled, auser will not be able to set the Lock feature by pressing the Lock key on theirterminal. If the option is enabled, the Lock Level drop-down list is used tolock, unlock or clear a lock status for a terminal. Selecting the All Clear optionwill initialize the password and it will clear the lock status for those selectedterminals.Select the Command Transmit to use (Send Once, Immediately or SendUntil Successful - see page 1-14) and click Execute.The status changes from “OK” to “Complete” and the LockStatus changes to“Lock” or “Unlock”.Figure 1-18 Command Drop-Down List