765. Using On-Screen Menu7 Menu Descriptions & Functions [INFO.]Displays the status of the current signal and lamp usage. This item has three pages (four pages on V300X/V260X).The information included is as follows:TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.[USAGE TIME][LAMP LIFE REMAINING] (%)*[LAMP HOURS USED] (H)[TOTAL CARBON SAVINGS] (kg-CO2)[TOTAL COST SAVINGS]* The progress indicator shows the percentage of remaining bulb life.The value informs you of the amount of lamp usage. When the remaining lamp time reaches 0, the LAMP LIFEREMAINING bar indicator changes from 0% to 100 Hours and starts counting down.If the remaining lamp time reaches 0 hours, the projector will not turn on regardless of whether the ECO MODEis set to OFF or ON.• The message to the effect that the lamp should be replaced will be displayed for one minute when the projectoris turned on and when the POWER button on the projector or the remote control is pressed.To dismiss this message, press any button on the projector or the remote control.Lamp life(H)Replacement lampECO MODEOFF ON3500 5000 NP13LP (V260X/V230X/V260/V230)3000 5000 NP18LP (V300X)• [TOTAL CARBON SAVINGS]This displays the estimated carbon saving information in kg. The carbon footprint factor in the carbon savingcalculation is based on the OECD (2008 Edition).
