4-12 Field Service GuidelinesPower Button, Microphone Assembly, KeyboardRemove the Power button, microphone assembly and/or keyboard as follows.1. Remove the LCD and top cover as previously described.2. The Power button is held in place primarily by the computer’s top cover. Once thetop cover is removed, just lift the Power button out of its retaining inserts.3. Remove the microphone assembly as follows. Locate the microphone assembly cable that attaches to connector P3 on theaudio board. Use a flat-head screwdriver to disconnect the cable from theaudio board. Slide the microphone assembly forward and remove from the unit.Figure 4-9 Removing the Power Button, Microphone Assembly, Keyboard
