6-6 Communicating with Your NEC VersaConnecting the Internal ModemFollow these steps to connect an RJ-11 telephone cable to the Mini PCI modem.Note When using a modem outside the U.S. and Canada, you might need aninternational telephone adapter, available at most electronics supply stores.Use only a standard phone line cord when connecting theinternal modem.1. Locate the RJ-11 telephone cable that ships with your NEC Versa notebook. Eachend of the cable has an RJ-11 connector that plugs into a standard telephone outlet.2. Locate and open the RJ-11 port cover on the left side of the system. Locate theRJ-11 port.3. Carefully plug the RJ-11 telephone cable into the RJ-11 port.4. Connect the other end of the RJ-11 telephone cable into an (analog) phone jack.Now you are ready to configure your modem for Internet or email access!Installing the Online Modem GuideFor additional information about your modemís AT commands and s-registers, use theApplication and Driver (A&D) CD to install the online modem guide for your system.(This guide is not available with all modems.) To determine the guide that isappropriate for your system, go to Start, Settings, Control Panel, System, and select theDevice Manager tab. Double click Modem to identify the name of your systemísmodem. Use the A&D CD to install the online modem guide of the same name to yourNEC Versa hard drive.
