NEC VERSA UltraLite Service And Reference Manual

Contents

NEC VERSA UltraLite Service And Reference Manual Manual pdf 30 page image

2-12 System Configuration and SetupInternal HDD Submenu ItemsMenu Item Settings (default is bold)LBA Mode Control Enabled, DisabledWhen Enabled is selected, it causes logical blockaddressing to be used in place of cylinders, heads, andsectors.When Type is set to Auto, the value in the LBA Mode fieldis auto-detected and the field is read only.32-Bit I/O Disabled, EnabledWhen Enabled, allows 32 bit data transfers.Transfer Mode Standard, Fast PIO1, Fast PIO2, Fast PIO3, Fast PIO4,Fast PIO3/DMA1, Fast PIO4/DMA2Selects the method for moving data to and from the drive.When Type is set to Auto, the value in the field is auto-detected and the field is read only.Ultra DMA Mode Disabled, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4Selects the Ultra DMA Mode for moving data to and fromthe drive. Autotype the drive to select the optimum transfermode.When Type is set to Auto, the value in the field is auto-detected and the field is read only.Advanced MenuChoose the Advanced menu by selecting Advanced in the legend bar on the Main menu screen.Other Advanced menu options are available by selecting submenus.Use the arrow keys to select one of the Advanced menu options and press Enter to select asubmenu. Items with grayed-out text are not available. Explanations of each Advanced menuitem are in the following table.Setting items on this menu to incorrect values can cause the system tomalfunction.Advanced MenuMenu Item Settings (default is bold)BootUp Num-Lock LockOn, LockOffSelects the state for Num Lock at power on.PS/2 Mouse Enabled, DisabledEnabled forces the PS/2 mouse port to be enabledregardless of whether a mouse is present. Disabledprevents any installed PS/2 mouse from functioning, butfrees up IRQ 12.