NEC XL-6500 User Manual
                                                                                  | |
Contents
| 
121.PART NAMES AND FUNCTIONSRemote control unit1 Remote JackInsert the supplied remote cable here.2 POWER Buttons (ON/OFF)Press the ON button to turn the projector on when theprojector is in the standby condition (STANDBY and RCREADY indicators lit). Press the OFF button to return theprojector to the standby condition.3 TEST ButtonPress to display the TEST PATTERN menu from whichyou can select a test pattern.4 ADJUST ButtonPress to display the ADJUST menu.5 OPERATE ButtonPress to display the OPERATE menu.Hold down the CTLbutton and then press the OPERATE button to directlydisplay the Lens Control adjustment screen.6 Backlight SwitchTurns the backlight on and off.If no button operation is made within 30 seconds with theBacklight ON, the Backlight will turn off to conservebattery life. The light stays on in standby and power-onwhen the remote control is used as a wired remote.7 PIC CTL ButtonPress to display the picture adjustment screen.NOTE: Some function items will not be available depend-ing on the type of video signal.8 SOUND CTL ButtonPress to display the VOLUME adjustment screen. Youcan adjust the volume of the ISS-6020/ISS-6020GSwitcher. (when used with the ISS-6020 switcher on SW1level or SW2 level mode)9 PICTURE (PIC) MUTE ButtonPress to mute the picture. Press again to display thepicture.0 SOUND MUTE ButtonPress to mute the sound. Press again to return the sound.(when used with the ISS-6020 switcher on SW1 level orSW2 level mode)A DISPLAY ButtonPress to turn on or off the on-screen display. Pressing withCTL eliminates the on-screen display; pressing with CTLwill restore display.NOTE: Even if the on-screen display may be turned offwith pressing CTL and DISPLAY, any adjustment willstill change the projector’ s memory settings. This modeis available even when an input is switched to another orthe power is turned off using the POWER OFF button onthe remote control.You can use your remote control with the cable or wirelesslyto operate your MultiSync Hivid 6500 Projector.If you want to use your remote control with the cable, connectone end of the cable to the jack on the remote control and theother end to the REMOTE 2 IN jack of the projector.1 ABC 2 DEF 3 GHIOFFON4 JKL 5 MNO 6 PQRTEST7 STU 8 VWX 9 YZ/ADJUSTOPERATE10 ,.SOUND CTLPIC CTLINFO INPUT LISTSOUND MUTEPIC MUTEPOSITION KELVINHELPDISPLAYR G BADDRESSSIG LEVELGAMMAPIXEL CLKPIXEL PHASESTOREDELETECTL ENTER ENDNORMALZOOM/PANPOWER INPUTCURSORONOFF CAPTION2HIJLNKMOPQSTUVR179ACDFG354680BE |
Related manuals for NEC HIVID 6500
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine