NEC XN120 Getting Started Manual

Also see for XN120 Vision: Advanced features guide User guide User guide User guide User manual

Contents

NEC XN120 Getting Started Manual Manual pdf 63 page image

Appendix A – 64 Button ConsolesXN120 Getting Started Guide 63Customising the buttonsWhen a console is installed the 64 buttons are automatically assigned as Direct Station Select (DSS) keys forextensions 200 to 263.You can customize the buttons of each console with program 30-03-01.The buttons can have the same functions as the programmable keys on the XN120 system phones. Thissection will show the setting of the DSS function. For other functions refer to the XN120 ProgrammingReference Manual 991435-5.Program 30-03-01Customise the buttons.Each button has two entries:Function code and Additionaldata.The 64 buttons are shown asKY01 to KY64.This guide shows functioncode 01 for DSS function.The additional data can be upto 36 digits long and can beany number including outsidenumbers.For outside numbers enter thetrunk access code followed bythe number to dial oute.g. 901509643100Default Setting:The 64 buttons are set as DSS function for extensions 200 to 263.Enter the Function Code, 01 for DSS function; you canoverwrite the current entry. Enter 000 to set the key to ‘NotDefined’.Press HOLD to confirm the entry and step to the AdditionalData.Enter the additional data for the key. This will determine thetelephone number that will be assigned to the button.Press DC several times when you are done to return to theProgram Mode.(Press SPK to save changes and exit if you are finished).30-03-01 DSS 1KY01=01Use Vol. Keys toselect anotherDSS console(1-9)Enter the Function Code.01 for DSS function30-03-02 DSS 1KY01=AD 200Enter the telephone number thatwill be assigned to the button