NEC e121 User Manual

Contents

38• Press Left Softkey to withhold for all calls and Right Softkey to cancel.The security settings protects your phone from improper and unauthorized use.These confidential numbers should be kept in a safe place for future access, if required.You may be required to enter one of the following security codes as shown below. When the phone prompts you for one of these codes, use thekeypad to enter the appropriate number and press Left Softkey to confirm.• PIN code (provided by your network to protect your SIM card if it is stolen)• PIN2 code (provided by your network for charge information and FDN services protection)• PUK/PUK2 code (respective personal unblocking code in case you forget the PIN/PUK code)• Phone code (default setting is “0000”)If you forget any of these codes, ALWAYS contact your service provider as they are the ONLY source for your codes.If the PIN2 code is entered incorrectly 3 times, you will need to contact your service provider for a PUK2 code.The PIN codes and security codes are between 4 to 8 digits.If the phone code is entered incorrectly 10 times (not necessarily in the same session), the Phone code will be locked. In order tounlock the code, you will need to contact your service provider.Change PINsThe PIN will be requested most of the times when the phone is switched on. This feature can be deactivated, at the risk of unauthorized usage of yourphone. Some service providers do not permit the deactivation of this control.You can set up your phone to require your PIN code entered when the phone is switched on before the phone can be used and receive anyincoming calls. If you entered your PIN code incorrectly for more than three times (not necessarily in the same session), you will have to contact yourservice provider for a PUK code to unblock your SIM card.Your phone supports advanced features (e.g. FDN) that may require a PIN2 code to be entered before they can be accessed ormodified.To activate PIN• From the main menu, select Settings > Security. Highlight PIN activate and press Left Softkey to toggle PIN activate Enable/Disable. Youwill have to key in a PIN code for activation. A tick in the check box beside the option indicates that PIN activate has been activated.PIN/PIN2/Phone code change• From the main menu, select Settings > Security > Code.• Select either Change PIN/Change PIN2/Chg. phone code.• Key in the current code. You will be prompted to enter the new code when the correct current code is entered. Enter the new code again andpress Left Softkey to confirm the new code.• A confirmation screen is displayed momentarily and the phone returns to Code display menu.Security