NEC wt610 Setup Manual

Also see for WT610 Series: Specifications Command guide Command guide Control commands User guide

E-2Setting Up the Screen and the Projector1. Refer to "Throw Distance (C)" in the diagram and use a distance between the screen and projector that corre-sponds to the screen size.As an example, when projecting to a 60" screen, set the projector with a separation of approximately 10.4"/26.3cm from the screen.2. Refer to "Height (D)" below and adjust the screen height, or adjust the height of the projector stand.As an example, when projecting to a 60" screen, adjust the height from the feet of the projector to the loweredge of the screen to approximately 19.0"/48.2 cm.0204060801001200 5 10 15 20 25 30Throw distance C (inch)Screen size (inch)0204060801001200 100 200 300 400 500 600 700Throw distance C (mm)Screen size (inch)NOTE• There is a tolerance of +/–5% because of design values.• The projection distance and the lower edge of the screenare calculated using a 4:3 aspect ratio.4045505560656770727578808485909596100641141642142633133323623814124414615005105596096196592.54.56.48.410.412.313.114.315.016.217.418.119.720.122.024.024.425.9Size(inch)Throw distance (C)mm inch35438641845048251452654655857759660963564167370471173713.915.216.517.719.020.220.721.522.022.723.524.025.025.226.527.728.029.0Height (D)mm inchHeight (B)mm inch659729799869939101010371080110711491191121912751289135914281443149925.928.731.534.237.039.740.842.543.645.246.948.050.250.753.556.256.859.08139141016111812191321136114221463152415851626170717271829193019512032610686762838914991102110671097114311891219128012951372144814631524Height32.036.040.044.048.052.053.656.057.660.062.464.067.268.072.076.076.880.024.027.030.033.036.039.040.242.043.245.046.848.050.451.054.057.057.660.0inchmminchmmWidthCDBack of projectorProjector footScreen centerBScreen