7Please refer to the individual sections for information on how tomake the settings. Switching offTurn the operating mode selector back, and push in. Theappliance switches off and the time appears in the clockdisplay.Before using the appliance for the first timeIn this section, you can read about■ How to set the clock after connecting up your appliance■ How to clean your appliance before using it for the first timeSetting the clock‹:‹‹ and the KJ3 symbols light up in the clock display.1. Turn the rotary selector to set the time of day.2. Press the ON clock function button.Your setting is applied.Changing the clockTo subsequently change the clock time, press the ONclockfunction button repeatedly until the KJ and 3 symbols lightup. Use the rotary selector to change the time of day.Note: In order to reduce the energy consumption of yourappliance in standby, you can switch off the clock display.Refer to the section entitled Electronic clock.Heating up the cooking compartmentTo remove the new appliance smell, heat up the cookingcompartment when empty and with the oven door closed.Make sure that the cooking compartment contains no leftoverpackaging, e.g. polystyrene pellets.Heat the cooking compartment for 60 minutes with the 4 Hotair grill at 200 °C.Note: Keep the kitchen ventilated while the appliance is heatingup.1. Use the operating mode selector to set the 4 Hot air grill.2. Using the temperature selector, set the temperature to200 °C3. Press the ƒ button.4. Switch off the appliance after 60 minutes.To do this, turn the operating mode selector back to ~ andpush it in.Once the cooking compartment has cooled, clean it with hot,soapy water.Cleaning the accessoriesBefore you use the accessories for the first time, clean themthoroughly with hot soapy water and a soft dish cloth.Operating the applianceIn this section, you can read about■ which operating modes are available for your oven.■ how to select an operating mode and temperature.■ how to set rapid heat upThe following operating modes are available for yourmicrowave appliance. A default temperature always appearswhen you make a setting.Setting the operating mode and temperatureExample in diagram:Hot air 3, 190 °C.1. Turn the operating mode selector until the required operatingmode is set.A default temperature appears on the temperature display.Operating mode Default tempera-ture in °C, grillsettingsTemperature rangein °C, grill settings3 Hot air 160 40, 100-2504 Hot air grilling 160 100-250= Circulated airgrilling160 100-250+ Full-surface grill high (3) medium (2)low (1)( Centre-area grill - -