NEFF D76F35N0GB Installation Instructions Manual

Contents

NEFF D76F35N0GB Installation Instructions Manual Manual pdf 16 page image

16InstallationAttachment and alignment1. Initially remove the protective foil from theback of the extractor hood and, followinginstallation, remove foil completely.2. Mount the extractor hood, ensuring that theback is attached firmly to the brackets Ⓐ.3. Align the extractor hood horizontally byturning the brackets..If required, the extractor hood can bemoved to the right or left Ⓑ.Locking screws and locking caps1. Mark the holes for the safety screws. Detachthe extractor hood, drill holes for the safetyscrews and press in wall plugs flush withthe wall.2. Attach the extractor hood and screw in thesafety screws tightly.3. Press the safety caps with the arrow upwardsonto the brackets until they click intoposition Ⓒ. RISK OF INJURYCheck that all locking screws and locking capshave been attached securely!4. Connect the pipes (see ”Connecting pipes”).5. Connect to the power supply (see ”Electricalconnection”).Removing the safety caps Remove the locking caps from the bracketsusing a suitable tool, e.g. a flat-bladescrewdriver.