P. 13- Neo ION 440English version5. DMX CONNECTION AND DMX PROTOCOLThe device is controlled by universal DMX 512 pro -tocol, DMX address is the start channel used to re-ceive instructions from the external controller. Forindependent control, each fixture must be assignedits unique address control channels. For example,this device has four channel modes: 31/32/18/20,if we set the mode at standard 31 channels mode,and there are several models need to be inde-pendently controlled, we just simply address firstfixture at 1, and second fixture at 32, third one at63, etc.If the devices have the same address, they willbehave synchronically.DMX addressing is limited, don’t set the addressso high that without enough control channelsfor the fixtures. Display is flashing when no DMXsignal is received.DMX addressingConnection: use DMX cable with 5 pin XLR-plugsto connect the controller with the fixture or onefixture with another.